FlexaBoot.

FlexaBoot is an inexpensive, lightweight, and flexible acoustical sound boot for return air grilles.

FLEXABOOT BENEFITS:

  • Reduces Room-to-Room Crosstalk and Transfer Noise - Increases Room Privacy

  • Flexible Design Allows Installation Above Ceilings Without Conflict

  • Inexpensive and Easy to Install

  • Less Labor, Shipping, and Handling Costs

FlexaBoot replaces expensive shop fabricated sheet metal boots often shown on plans. 

FLEXABOOT FEATURES:

  • Complete Kit Ready to Install – Available in 16" and 10" Diameters

  • No Fibrous Materials in Airstream

  • Five Times Lighter Than Sheet Metal Return Air Boot

  • U.L. Classified Components - Made in USA

FLEXABOOT FORMS:

CAD DRAWINGS.

INSTALLATION.

SUBMITTAL.

FAQs

  • FlexaBoot provides multiple advantages:

    o FlexaBoots cost approximately 50% less compared to sheet metal boots

    o Flexibility above ceiling – easy to offset over, under, and around obstacles

    o FlexaBoots are acoustically designed and tested - sheet metal boots are not

    o No fibrous materials in the air stream

    o FlexaBoots weigh 9 lbs each - sheet metal boots weigh approximately 47 lbs each

    o All components are U.L classified and made in USA

  • Yes, click here to request “Test Data” for acoustical testing reports.

  • Yes, thousands of FlexaBoots have been accepted and installed through the V.E. process, saving thousands of dollars on numerous projects.

  • The most economical choice is 24x24 perforated face grille with either a 16” round neck or 10” round neck. Square-to-round adaptors allow FlexaBoot to be used with almost all return grilles with 22x22 and 22x12 necks sizes.

  • FlexaBoots are available in 10” and 16” round. The 10” round is typically used with 24x12 face return grilles. The 16” round is typically used with 24x24 face return grilles.

  • Both 16” and 10” FlexaBoots ship two per carton.

  • One hanger per FlexaBoot. Sheet metal boots typically require at least three hangers per boot.